Maxtor 16Channel Stand Alone DVR Instrukcja Użytkownika Pobierz pdf (Strona 26)

Network Stand Alone DVR

Network (JPEG2000+H.264)

(3) HDD CHANGE SETUP

HDD CHANGE SETUP

SAVE DVR INFO

LOAD DVR INFO

SELECT MENU : ▲▼, & [ENTER]

1) SAVE DVR INFO

Once you press ENTER button on "SAVE DVR INFO" , the DVR information will be saved on HDD.

If the DVR information is saved properly, you can see "NOW CHANGE HDDDISK" message on DVR.

Then power off the DVR and change with new HDD.

※ NOTICE : Be sure to write down the DVR information as like NTSC/PAL, MODEL name, Channel,

HDD location(PORT 1, PORT2). When you want to retrieve the HDD(old), you must do based on this

DVR information.

2) LOAD DVR INFO

When you want to retrieve the HDD which is used with other DVR set, you can use "LOAD DVR INFO “.

Install the HDD with new DVR and press [STOP] button when the DVR is booting. Then you can see,

"HDD CHANGE MODE-ON" message. On this mode, the DVR will not record before you press

[ENTER] button on “ LOAD DVR INFO” menu when the DVR is booting.

Notice : The HDD retrieval should be performed by qualified service personnel only.

CHAP. 5 Set Up

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 76 77

Brak uwag

Maxtor 16Channel Stand Alone DVR Instrukcja Użytkownika Strona 26